Xerox 6100BD - Phaser Color Laser Printer Panduan Memulai - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Server Cetak Xerox 6100BD - Phaser Color Laser Printer. Xerox 6100BD - Phaser Color Laser Printer 37 halaman. Disk overwrite installation and usage
Juga untuk Xerox 6100BD - Phaser Color Laser Printer: Panduan Instalasi (34 halaman), Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Brosur & Spesifikasi (4 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Instal Manual (2 halaman), Catatan Rilis (2 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Memulai (34 halaman), Panduan Pengguna (32 halaman), Manual (11 halaman), Panduan Instalasi dan Pengoperasian (8 halaman)

XEROX DOCUMENT SERVICES PLATFORM SERIES

GETTING STARTED

4. Tools and Utilities

This chapter includes the various software tools and utilities

used with the DocuSP software.

A UNIX command line utility included allowing the ability to bind

more than 125 sheets of paper for the DocuTech 61xx printers

only.

Perform the following steps to modify the number of pages that

can be bound from 125 to 128.

1. In the background, right-click to open the menu. Open a

terminal window.

2. Login as root user.

3. Type: /opt/XRXnps/bin/setBind128 –f # and press

<Enter>, where # equals 1 to set the limit for bind jobs to

128 and # equals 0 to set the limit for bind jobs to 125.

4. Close the terminal window. Restart the DocuSP software.

♦

The Set Retain PDL feature on the DocuSP is limited to

retain only 50 completed jobs for future printing. Depending

on the size of retained jobs and the size of the internal hard

drives; a lower value may be more appropriate for some

customers.

♦

A UNIX utility named setretainPDL has been added to the

DocuSP to allow the user to specify the number of jobs to be

retained within a range of 1 to 100.

♦

Customers who use the Set Retain PDL feature must be

aware that monitoring the disk capacity is the responsibility of

the end-user. The DocuSP does not have a process for

indicating when the disk is full. Increasing the number of

retained jobs should only be done if the customer is confident

that this will not fill the controller hard drive. Approaching disk

capacity can prevent job transmission or otherwise impact

system behavior.

DOCUSP 4.1