Xerox 6100BD - Phaser Color Laser Printer Aan de slag handleiding - Pagina 29

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Xerox 6100BD - Phaser Color Laser Printer. Xerox 6100BD - Phaser Color Laser Printer 37 pagina's. Disk overwrite installation and usage
Ook voor Xerox 6100BD - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificaties (2 pagina's), Gebruikershandleiding (32 pagina's), Brochure & specificaties (4 pagina's), Gebruikershandleiding (28 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Installatiehandleiding (2 pagina's), Release Release (2 pagina's), Handmatig (34 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Gebruikershandleiding (32 pagina's), Handmatig (11 pagina's), Installatie- en bedieningshandleiding (8 pagina's)

Xerox 6100BD - Phaser Color Laser Printer Aan de slag handleiding

Ability to Bind 128 Pages

Set Retain PDL

XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED

4. Tools and Utilities

This chapter includes the various software tools and utilities
used with the DocuSP software.
A UNIX command line utility included allowing the ability to bind
more than 125 sheets of paper for the DocuTech 61xx printers
only.

Changing the Binding Limit

Perform the following steps to modify the number of pages that
can be bound from 125 to 128.
1. In the background, right-click to open the menu. Open a
terminal window.
2. Login as root user.
3. Type: /opt/XRXnps/bin/setBind128 –f # and press
<Enter>, where # equals 1 to set the limit for bind jobs to
128 and # equals 0 to set the limit for bind jobs to 125.
4. Close the terminal window. Restart the DocuSP software.
The Set Retain PDL feature on the DocuSP is limited to
retain only 50 completed jobs for future printing. Depending
on the size of retained jobs and the size of the internal hard
drives; a lower value may be more appropriate for some
customers.
A UNIX utility named setretainPDL has been added to the
DocuSP to allow the user to specify the number of jobs to be
retained within a range of 1 to 100.
Customers who use the Set Retain PDL feature must be
aware that monitoring the disk capacity is the responsibility of
the end-user. The DocuSP does not have a process for
indicating when the disk is full. Increasing the number of
retained jobs should only be done if the customer is confident
that this will not fill the controller hard drive. Approaching disk
capacity can prevent job transmission or otherwise impact
system behavior.
DOCUSP 4.1
25