Xerox Nuvera 100 Manual Perencanaan - Halaman 34

Jelajahi secara online atau unduh pdf Manual Perencanaan untuk Server Cetak Xerox Nuvera 100. Xerox Nuvera 100 38 halaman. Production system
Juga untuk Xerox Nuvera 100: Lembar Spesifikasi (2 halaman), Panduan Fitur (34 halaman), Manual Perencanaan (22 halaman), Panduan Pengguna (40 halaman), Panduan Pengoperasian (34 halaman), Panduan Referensi (2 halaman), Manual Perencanaan (20 halaman), Panduan Referensi (42 halaman), Referensi Cepat (2 halaman), Instal Manual (2 halaman), Panduan Tambahan (48 halaman), Manual Perencanaan (16 halaman), Panduan Referensi (2 halaman), Spesifikasi (2 halaman), Panduan Petunjuk dan Tips (18 halaman), Panduan Petunjuk dan Tips (18 halaman), Panduan Memulai (26 halaman), Panduan Memulai (30 halaman)

Halaman Cetak
Xerox Nuvera 100 Manual Perencanaan
C.P. Bourg Document Finisher (BDFx)

Limitations

System Dependencies and Prerequisites

•
A Finisher Transport Module is required for in-line
connectivity to the printer.
•
A slight Cover Feeder feed mechanism adjustment may be
necessary when changing cover weights (lightweight stocks
may require a more precise adjustment).
•
For 11" x 17" / A3 simplex single fold only documents, paper
weight greater than 20 lb (80 gsm) are recommended.
•
For 8.5" x 11" / A4 simplex single fold only documents, the
N-1 face up orientation is required.
•
Currently coated stock is not recommended.
•
The BDFx can only be guaranteed to work to its maximum
book thickness when feeding (8.5 x 11 / A4) paper if the
paperweight is 90 gsm or less. (Long grain paper with a
weight above 90 gsm should be tested with the customer
paper and application before selling the BDFx.)
•
Use of short grain paper is highly recommended for 11 x 17"
/ A3 sized paper.
•
The Finisher Transport Module is required for in-line
connectivity to the printer.
•
Currently, a Xerox Document Stacker 5000 must be installed
in-line with the printer and the BDFx.
•
If there is a transition of an existing BCFx to a Nuvera Digital
Production System, an upgrade is needed.
Note: In case the floor at the customer site is very uneven, it is
recommended that the Nuvera IOT is installed and leveled with a
Caster Leveling Kit (kit number 498K07900).
6-2