Xerox Nuvera 100 Planning Manual - Page 34

Browse online or download pdf Planning Manual for Print Server Xerox Nuvera 100. Xerox Nuvera 100 38 pages. Production system
Also for Xerox Nuvera 100: Specification Sheet (2 pages), Features Manual (34 pages), Planning Manual (22 pages), User Manual (40 pages), Operation Manual (34 pages), Reference Manual (2 pages), Planning Manual (20 pages), Reference Manual (42 pages), Quick Reference (2 pages), Install Manual (2 pages), Supplementary Manual (48 pages), Planning Manual (16 pages), Reference Manual (2 pages), Specifications (2 pages), Hints And Tips Manual (18 pages), Hints And Tips Manual (18 pages), Getting Started Manual (26 pages), Getting Started Manual (30 pages)

Print Page
Xerox Nuvera 100 Planning Manual
C.P. Bourg Document Finisher (BDFx)

Limitations

System Dependencies and Prerequisites

•
A Finisher Transport Module is required for in-line
connectivity to the printer.
•
A slight Cover Feeder feed mechanism adjustment may be
necessary when changing cover weights (lightweight stocks
may require a more precise adjustment).
•
For 11" x 17" / A3 simplex single fold only documents, paper
weight greater than 20 lb (80 gsm) are recommended.
•
For 8.5" x 11" / A4 simplex single fold only documents, the
N-1 face up orientation is required.
•
Currently coated stock is not recommended.
•
The BDFx can only be guaranteed to work to its maximum
book thickness when feeding (8.5 x 11 / A4) paper if the
paperweight is 90 gsm or less. (Long grain paper with a
weight above 90 gsm should be tested with the customer
paper and application before selling the BDFx.)
•
Use of short grain paper is highly recommended for 11 x 17"
/ A3 sized paper.
•
The Finisher Transport Module is required for in-line
connectivity to the printer.
•
Currently, a Xerox Document Stacker 5000 must be installed
in-line with the printer and the BDFx.
•
If there is a transition of an existing BCFx to a Nuvera Digital
Production System, an upgrade is needed.
Note: In case the floor at the customer site is very uneven, it is
recommended that the Nuvera IOT is installed and leveled with a
Caster Leveling Kit (kit number 498K07900).
6-2