ALDERWOOD Eros Pro Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Pembicara ALDERWOOD Eros Pro. ALDERWOOD Eros Pro 12 halaman. Hand crafted sound

LIVE SOUND USAGE

To use the Eros PRO for live sound applications we recommend

applying a highpass filter at 200hz with a 24DB/oct slope.

_________________________________________________

WIRING

The Eros PRO uses a Phoenix contact 3.81mm terminal plug, for

discreet and simple wiring, this connector has exceptional electrical

connection qualities and also allows for simple unplugging for quick

de-installation when the need arises to repaint walls.

We recommend speaker cable thickness of 20-16g speaker cable be

used, on long cable runs up to 80 meters we recommend 16g cable

be used to avoid voltage drop. In humid or salt air environments

tinned copper will resist corrosion and provide better signal integrity

for many years longer than standard copper.

A speaker cable that has a black strip or identifying marker on one

side will help when identifying which is negative and positive, we

recommend that the side with a black strip is used as negative as

a rule of thumb. It is of vital importance the all speakers used are

wired the same to ensure proper sonic performance

Care must be taken when striping speaker cables, only strip 5mm

off the ends and ensure no strands of wire are exposed or able

to short out the connection which could result in damage to the

amplifier or the speakers.

Use the supplied flat blade screwdriver to first loosen the 2 wire

retaining screws, before inserting the wires and tightening the 2

screws till tight.