ALDERWOOD Eros Pro Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Altoparlanti ALDERWOOD Eros Pro. ALDERWOOD Eros Pro 12. Hand crafted sound

LIVE SOUND USAGE
To use the Eros PRO for live sound applications we recommend
applying a highpass filter at 200hz with a 24DB/oct slope.
_________________________________________________

WIRING

The Eros PRO uses a Phoenix contact 3.81mm terminal plug, for
discreet and simple wiring, this connector has exceptional electrical
connection qualities and also allows for simple unplugging for quick
de-installation when the need arises to repaint walls.
We recommend speaker cable thickness of 20-16g speaker cable be
used, on long cable runs up to 80 meters we recommend 16g cable
be used to avoid voltage drop. In humid or salt air environments
tinned copper will resist corrosion and provide better signal integrity
for many years longer than standard copper.
A speaker cable that has a black strip or identifying marker on one
side will help when identifying which is negative and positive, we
recommend that the side with a black strip is used as negative as
a rule of thumb. It is of vital importance the all speakers used are
wired the same to ensure proper sonic performance
Care must be taken when striping speaker cables, only strip 5mm
off the ends and ensure no strands of wire are exposed or able
to short out the connection which could result in damage to the
amplifier or the speakers.
Use the supplied flat blade screwdriver to first loosen the 2 wire
retaining screws, before inserting the wires and tightening the 2
screws till tight.
4