Yamaha Clavinova CVP-20 Panduan Pemilik - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha Clavinova CVP-20. Yamaha Clavinova CVP-20 27 halaman. Clavinova
Juga untuk Yamaha Clavinova CVP-20: Panduan Pemilik (27 halaman), Panduan Pemilik (26 halaman), Panduan Pemilik (26 halaman)

Halaman Cetak

3. Local On/Off

This is used to cancel the sounds of the CVP-20. Sound is only heard

when the CVP-20 is played from an external device through MIDI.

In the Local On mode, sound is heard from the Clavinova as notes

are played (internal tone generator emits sound).

In the Local Off mode, however, the Clavinova does not respond to

the keys being played on its keyboard. It can still transmit informa-

tion through the MIDI OUT jack when keys are played, and it can

respond to MIDI data received through the MIDI IN jack. In the

connection below, the tone generator responds to the keys being

played on the Clavinova while the Clavinova responds to the MIDI

data being sent from the EMQ-1 Memory Box.

EMT-1 FM Sound Box

{played

from

Clavinova

keyboard)

MIDI OUT

CVP-20

(Local Control OFF, played from EMQ-1

Memory

Box)

e Selecting the Local On or Off mode.

Step 1. Press E. PIANO

1/2 while holding down the MIDI/

TRANSPOSE button. The E. PIANO 1/2 voice selector's LED

is lit when in the Local Off mode. (If the LED is not lit, the Local

On mode has been selected.)

Note: When the keyboard is split or when Piano ABC is used, only

the upper keyboard can assume the Local Off mode.

4. Program Change On/Off

This is used to cancel the transmission and reception of voice select

information (program changes).

In the Program Change On mode, the Clavinova responds to any

program change data (voice change data) from an external key-

board. It will also transmit program change data causing the cor-

responding voice number to be selected on the external device if the

device is set to receive program change data.

In the Program Change Off mode, program change data is not

transmitted or received.

e Selecting Program Change On or Off mode

Step 1. Press HARPSICHORD

1/2 while holding down the

MIDI/TRANSPOSE button. The HARPSICHORD

1/2 voice

selector's LED is lit when in the Program Change Off mode. (If

the LED is not lit, the Program Change On mode has been

selected.)

5. Control Change On/Off

This is used to cancel the transmission and reception of DAMPER

and SOFT/SOSTENUTO

pedal data, and the reception of other

control settings received from an external device.

In the Control Change On mode, the Clavinova responds to any

control change data from an external device and transmits control

change data to external devices that are set up to receive Control

Change data.

e Selecting the Control Change On or Off mode

Step 1. Press VIBES

1/2 while holding down

the MIDI/

TRANSPOSE

button. The VIBES

1/2 voice selector's LED

lights when in the Control Change Off mode. (if the LED is not

lit, the Control Change On mode has been selected.)

6. Multi-timbre On/Off

In the Multi-timbre mode, the Clavinova's voices can be indepen-

dently controlled on different MIDI channels from an external

device such as the Yamaha

EMQ-1

Memory Box. The CVP-20

responds to these signals and functions as a multi-timbral voice

module. The possible reception channels, and initially set voices are

listed below.

Reception Channel

Initial Voice

Piano 1

E. Piano 1

E. Bass 1

Vibes 1

Guitar

Strings

Brass

Wood 1

[ Rhythm Y

Y (Refer to the section "Channel

15" located below for further

details.)

Program change, volume, sustain, soft and all note off data are also

received on the channels listed above.

SNA)

Rm)

шә

оре

e Turning Multi-timbre mode on or off

Step. 1 Press GUITAR/JAZZ GUITAR while holding down the

MIDI/TRANSPOSE

button. The GUITAR/JAZZ GUITAR

voice selector's LED lights when the Multi-timbre mode is on.

(If the LED is not lit, the Multi-timbre mode has been turned

off.)

e Example: Connecting the EMQ-1 Memory Box to the CVP-20

to record 3 different parts.

Step 1. Connect the EMQ-1 to the CVP-20 as shown in the illus-

tration below.

Clavinova

Step 2. Select the first voice and MIDI send channel number.

Record the first part on the EMQ-1.

Step. 3. Activate the CVP-20's Multi-timbre mode, then select a

new voice and MIDI send channel. Record the second part on

the EMQ-1 using its over-dubbing feature.

Step 4. While still in the Multi- timbre mode, select a third voice

and MIDI send channel. Record the third part on the EMQ-1 us-

ing its over-dubbing feature.

Step 5. Play back the EMQ-1 while still in the Multi-timbre

mode. The recorded parts are played back using the individual

voices selected during recording,

providing a full ensemble

sound.

* Channel 15

Channel 15 is used for the transmission/reception of rhythm data

with set note numbers that conform to the note numbers of the

Yamaha EMR-1

Drum

Box expander module. The CVP-20's

preset rhythm numbers are also transmitted through channel 15

as program change data.

Channel 15 is set to program change number 99 when the Multi-

timbre mode is first entered. No rhythm pattern sounds when this

program change number is selected. A pattern will sound only af-

ter a different program change number is received by the CVP-20.

(Program change numbers 99 and 98 are both non-sounding pro-

gram change numbers. They can be used for 4/4 time and 3/4 time

rests, respectively.)

The note assignments for the percussion instrument feature of

Channel 15 is shown in the following illustration. It is different from

the note assignments illustrated on the CVP-20's panel.

Note: If the note assignments shown on the CVP-20's panel are

desired for drum parts, use Channels 1 through 8.