Yamaha DTX530K Panduan Pemilik - Halaman 37

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha DTX530K. Yamaha DTX530K 48 halaman. Drum trigger module
Juga untuk Yamaha DTX530K: Panduan Perakitan (1 halaman)

Halaman Cetak

TRG7

RejLvl (Speciﬁed Rejection Level)

TRG7~

ƒsnare~~0%

"RejLv1=3Frm=56‚

RejLvl [Range]

0–9

Frm

[Range]

1–6, 56 (5 and 6), 7–12, 17 (1 and 7),

tm, cy, tc

This setting is used to prevent crosstalk between the input jack

assigned in the upper half of the page and the input jack assigned

in the "Frm=" setting.

After an triggering event occurs from the pad that is assigned in

the "Frm=" setting, the pad assigned in the upper half of the dis-

play will not sound for a certain length of time unless the input

level is greater than the value set here. Larger values will require

a greater input level in order to produce a trigger event.

A "Frm="56" setting assigns trigger input jacks 5 and 6.

A "Frm="17" setting assigns trigger input jacks 1 and 7.

A "Frm="tm" setting assigns trigger input jacks 2, 3, and 4.

A "Frm="cy" setting assigns trigger input jacks 5, 6, 7, and 9.

A "Frm="tc" setting assigns trigger input jacks 2, 3, 4, 5, 6, 7,

and 9.

TRG8

CopyToInput (Trigger Setup Copy)

TRG8 ~ƒsnare

"CopyToInput=~2‚

This function allows you to copy all data settings in pages [TRG2

Type (Pad Type)] through [TRG7 RejLvl (Speciﬁed Rejection

Level)] to another input jack.

NOTICE

• When the Trigger Setup Copy operation is carried out, the

Trigger Setup data will be replaced with the settings of

the copy source.

Operation

1. Hit a pad to select the copy source (input jack) from

which the data will be copied.

Rotate the jog dial and assign the copy destination (input

jack).

Copy source (input jack)

TRG8~

ƒsnare

"CopyToInput=~2‚

Copy destination (input jack)

2. Press the [SAVE/ENTER] button. A prompt appears ask-

ing conﬁrmation of the Copy operation.

Input~Copy~to~2

~Are~you~sure~?

3. Press the [SAVE/ENTER] button to actually execute the

Copy operation.

* To cancel the Copy operation, press any button except for the

[SAVE/ENTER] and [SHIFT] buttons (the jog dial can also be

used to cancel the operation).

The following display appears after the Copy operation is

complete.

~~~Completed!

8 Trigger Setup Edit

DTX500 Owner's Manual