Yamaha Silent Guitar SLG-100N Panduan Servis - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Servis untuk Alat Musik Yamaha Silent Guitar SLG-100N. Yamaha Silent Guitar SLG-100N 23 halaman. Yamaha guitar user manual
Juga untuk Yamaha Silent Guitar SLG-100N: Panduan Pemilik (16 halaman), Spesifikasi (2 halaman), Brosur (40 halaman), Panduan Servis (22 halaman), Panduan Pemilik (Bahasa Jepang) (17 halaman)

Halaman Cetak

Yamaha Silent Guitar SLG-100N Panduan Servis

DISASSEMBLY PROCEDURE

Preparations

Make the following preparations;

Turn off the power switch.

Remove the battery cover and battery.

Left Frame

(Time required: About 2 minutes)

1-1 Loosen the adjusting bolt (front) marked [E15] and the adjusting

bolt (rear) marked [E16]. The left frame can then be removed.

(Fig.1)

Bracket Assembly, Bracket, Sleeve

(Time required: About 5 minutes each)

2-1 Remove the left frame. (See procedure 1.)

2-2 Bracket Assembly:

Remove the two (2) screws marked [D05]. The upper bracket

assembly can then be removed from the left frame. (Fig.1)

The lower bracket assembly can be removed in the same manner.

2-3 Bracket, Sleeve:

Remove the two (2) screws marked [E19]. The upper bracket

and the upper sleeve can then be removed. (Fig.1)

The lower bracket and the lower sleeve can be removed in the

same manner.

Right Frame

(Time required: About 2 minutes)

3-1 Remove the four (4) screws marked [E22]. The right frame can

then be removed with the horn. (Fig.1)

Horn, Right Bracket

(Time required: About 5 minutes each)

4-1 Remove the right frame. (See procedure 3.)

4-2 Horn:

Remove the two (2) screws marked [D08]. The horn can then be

removed. (Fig.1)

4-3 Right Bracket:

Remove the two (2) screws marked [E21]. The upper right

bracket can then be removed. (Fig.1)

The lower right bracket can be removed in the same manner.

Peg

Bracket

Bracket assembly

[E19]

Sleeve

[D05]

Left frame

Bracket assembly

[E19]

[D05]

Sleeve

[E16]

Bracket

Peg

String

Panel holder assembly

[F02] X 4

[E15]

Panel holder

Spacer

[E22]

PUP

Pickup

[E21]

Horn

Right bracket

[D08]

Right bracket

[E21]

Right frame

[E22]

[D05]: Flat Head Tapping Screw-2

3.0X8 (QC667000)

[D08]: Flat Head Tapping Screw

3.5X20 (QC667100)

[E15]: Adjusting Bolt, Front

M6.0XP1X25 (QC653400)

[E16]: Adjusting Bolt, Rear

M6.0XP1X12 (QC653500)

[E19]: Flat Head Tapping Screw

3.0X14 ZMC2BL (QC699200)

[E21]: Flat Head Tapping Screw

3.0X14 ZMC2BL (QC699200)

[E22]: Flat Head Tapping Screw-2

3.0X8 (QC667000)

[F02]: Bind Head Tapping Screw-1

3.0X10 ZMC2BL (20404200)

Fig.1

SLG-100N