- ページ 7

楽器 Yamaha Silent Guitar SLG-100NのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Yamaha Silent Guitar SLG-100N 23 ページ。 Yamaha guitar user manual
Yamaha Silent Guitar SLG-100N にも： オーナーズマニュアル (16 ページ), 仕様 (2 ページ), パンフレット (40 ページ), サービスマニュアル (22 ページ), (取扱説明書 (17 ページ)

ページを印刷する
Yamaha Silent Guitar SLG-100N サービスマニュアル

DISASSEMBLY PROCEDURE

Preparations
Make the following preparations;
Turn off the power switch.
Remove the battery cover and battery.
1.
Left Frame
(Time required: About 2 minutes)
1-1 Loosen the adjusting bolt (front) marked [E15] and the adjusting
bolt (rear) marked [E16]. The left frame can then be removed.
(Fig.1)
2.
Bracket Assembly, Bracket, Sleeve
(Time required: About 5 minutes each)
2-1 Remove the left frame. (See procedure 1.)
2-2 Bracket Assembly:
Remove the two (2) screws marked [D05]. The upper bracket
assembly can then be removed from the left frame. (Fig.1)
The lower bracket assembly can be removed in the same manner.
2-3 Bracket, Sleeve:
Remove the two (2) screws marked [E19]. The upper bracket
and the upper sleeve can then be removed. (Fig.1)
The lower bracket and the lower sleeve can be removed in the
same manner.
3.
Right Frame
(Time required: About 2 minutes)
3-1 Remove the four (4) screws marked [E22]. The right frame can
then be removed with the horn. (Fig.1)
4.
Horn, Right Bracket
(Time required: About 5 minutes each)
4-1 Remove the right frame. (See procedure 3.)
4-2 Horn:
Remove the two (2) screws marked [D08]. The horn can then be
removed. (Fig.1)
4-3 Right Bracket:
Remove the two (2) screws marked [E21]. The upper right
bracket can then be removed. (Fig.1)
The lower right bracket can be removed in the same manner.
Peg
Bracket
Bracket assembly
[E19]
Sleeve
[D05]
Left frame
Bracket assembly
[E19]
[D05]
Sleeve
[E16]
Bracket
Peg
String
Panel holder assembly
[F02] X 4
[E15]
Panel holder
Spacer
[E22]
PUP
Pickup
[E21]
Horn
Right bracket
[D08]
Right bracket
[E21]
Right frame
[E22]
[D05]: Flat Head Tapping Screw-2
3.0X8 (QC667000)
[D08]: Flat Head Tapping Screw
3.5X20 (QC667100)
[E15]: Adjusting Bolt, Front
M6.0XP1X25 (QC653400)
[E16]: Adjusting Bolt, Rear
M6.0XP1X12 (QC653500)
[E19]: Flat Head Tapping Screw
3.0X14 ZMC2BL (QC699200)
[E21]: Flat Head Tapping Screw
3.0X14 ZMC2BL (QC699200)
[E22]: Flat Head Tapping Screw-2
3.0X8 (QC667000)
[F02]: Bind Head Tapping Screw-1
3.0X10 ZMC2BL (20404200)
Fig.1
SLG-100N
7