Yamaha H01AG Panduan Pemilik - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Papan Ketik Elektronik Yamaha H01AG. Yamaha H01AG 30 halaman. Quick operation guide
Juga untuk Yamaha H01AG: Panduan Pengoperasian Cepat (2 halaman)

Halaman Cetak

Troubleshooting

Problem

The H01 does not turn on.

A click or pop is heard when the power is

turned on or off.

Noise is heard from the speakers or head-

phones.

The overall volume is low, or no sound is

heard.

The 50 Piano Preset songs cannot be

played.

The sustain pedal has no effect.

There is a slight difference in sound quality

among different notes played on the key-

board.

Possible Cause and Solution

The H01 has not been plugged in properly. Securely insert the female plug into the

socket on the H01, and the male plug into a proper AC outlet (page 10).

This is normal when electrical current is being applied to the instrument.

The noise may be due to interference caused by the use of a mobile phone in close

proximity to the H01. Turn off the mobile phone, or use it further away from the H01.

• The Master Volume is set too low; set it to an appropriate level using the [MASTER

VOLUME] control.

• Make sure a pair of headphones is not connected to the headphones jack

(page 10).

Make sure that a USB storage device is not connected to the [USB TO DEVICE] ter-

minal.

The pedal cable/plug may not be properly connected. Make sure to securely insert

the pedal plug into the proper jack (page 24).

This is normal and is a result of the sampling system.

Troubleshooting

H01 Owner's Manual