Yamaha C-5000 Panduan Pemilik - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Yamaha C-5000. Yamaha C-5000 44 halaman.

Note

For information regarding the connection procedure, refer

to "Connections" (page 19) .

PHONO jacks

RCA and XLR-type jacks. If the INPUT selector is set

to PHONO, the signals at the RCA-type PHONO jacks

will be the input source. If the INPUT selector is set to

PHONO BAL, the signals at the XLR-type PHONO jacks

will be the input source.

Your preamplifier comes with a shorting plug installed on

each RCA-type PHONO input jack. If you are planning

to connect an external component to these jacks, remove

the shorting plugs. For more information, refer to

"Connecting a turntable" (page 22).

P H

Rear panel

O N

CAUTION

Handle the shorting plugs carefully . Do not allow children

to play with the shorting plug; otherwise they might

swallow it .

NOTICE

• Shorting plugs are intended for unused INPUTS ONLY;

using them on OUTPUTS can cause serious damage to

your components .

• If you are planning not to use the RCA-type PHONO input

jacks, insert the shorting plugs into the jacks to prevent

random static or noise from degrading the audio signal .

SIGNAL GND (ground) terminal

If you connect your turntable to the RCA-type PHONO

input jacks, also connect the turntable to this terminal.

Doing so may reduce noise.