Yamaha C-5000 Owner's Manual - Page 10
Browse online or download pdf Owner's Manual for Amplifier Yamaha C-5000. Yamaha C-5000 44 pages.
Print Page
Note
For information regarding the connection procedure, refer
to "Connections" (page 19) .
A.
PHONO jacks
RCA and XLR-type jacks. If the INPUT selector is set
to PHONO, the signals at the RCA-type PHONO jacks
will be the input source. If the INPUT selector is set to
PHONO BAL, the signals at the XLR-type PHONO jacks
will be the input source.
Your preamplifier comes with a shorting plug installed on
each RCA-type PHONO input jack. If you are planning
to connect an external component to these jacks, remove
the shorting plugs. For more information, refer to
"Connecting a turntable" (page 22).
P H
10
Rear panel
O
O N
CAUTION
Handle the shorting plugs carefully . Do not allow children
to play with the shorting plug; otherwise they might
swallow it .
NOTICE
• Shorting plugs are intended for unused INPUTS ONLY;
using them on OUTPUTS can cause serious damage to
your components .
• If you are planning not to use the RCA-type PHONO input
jacks, insert the shorting plugs into the jacks to prevent
random static or noise from degrading the audio signal .
B.
SIGNAL GND (ground) terminal
If you connect your turntable to the RCA-type PHONO
input jacks, also connect the turntable to this terminal.
Doing so may reduce noise.