Yamaha C-5000 Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Amplifier Yamaha C-5000. Yamaha C-5000 44 pages.

Print Page

INPUT selector/indicator

Enables you to select the input source to play back.

Options are: PHONO, PHONO BAL, TUNER, CD, BAL 1,

BAL 2, LINE 1, and LINE 2. The indicator for the selected

input source lights up.

Note

If LINE 2 is selected here, audio signals will not be output at

the LINE 2 OUT (recording) jacks .

SUBSONIC FILTER switch

Toggles between ON (enabled) and THROUGH (disabled)

for the subsonic filter. For more information, refer to

"Adjusting the turntable input setting" (page 29).

Note

If the INPUT selector is set to any option other than PHONO

or PHONO BAL, the filter will be disabled .

AUDIO MUTE switch/indicator

Press this switch to reduce the current volume level by

approximately 20 dB. The indicator will light up. Press

again to restore the audio output to the previous volume

level. The indicator will turn off.

VOLUME control

Adjusts the volume level. This setting will not affect the

output level at the LINE 2 OUT (recording) jacks.

Note

The VOLUME control will not affect the volume level if EXT .

DIRECT is selected as the input source . To adjust the volume

level, use the volume control on the external preamplifier

or another component connected to the EXT . IN jacks .

Feet

If the unit is unstable, adjust the height of the feet as

needed by rotating them.