Yamaha DSP-A970 Panduan Pengoperasian - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penguat Yamaha DSP-A970. Yamaha DSP-A970 48 halaman. Digital sound field processing amplifier

Halaman Cetak

2-2. RECORDING A SOURCE TO AUDIO/VIDEO TAPE

(OR DUBBING FROM A TAPE TO ANOTHER)

To record an input source to be played

1. Press the REC OUT switch (so that "REC OUT ... " appears on the

display and the monitor screen).

2. Within 5 seconds after the REC OUT switch is pressed, select the

"SOURCE" position with the input selector switch (so that "REC

OUT SOURCE" appears on the display panel and the monitor

screen).

Front panel

3. Press the REC OUT switch (so that the indicator corresponding

to the selected source to be recorded stops flashing).

* The same result will be gained after 5 seconds automatically

without any operation.

4. Select an input source to be played (and to be recorded).

(See page 27 for the method of input source selection.)

Front panel

5. Play the source.

6. Set the tape deck or VCR used for recording to the recording

mode.

Adjust the recording level on the tape deck or VCR.

Remote control