Clarke 6462000 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Alat Listrik Clarke 6462000. Clarke 6462000 17 halaman. Rotary tool set
Halaman Cetak
FITTING DISCS & GRINDING STONES TO THE MANDREL
1. Mount the selected disc on to the
mandrel as shown, ensuring the
two washers are in place.
• DO NOT overtighten the screw.
FITTING CLOTH POLISHING WHEELS
1. Screw the cloth wheel onto the
mandrel firmly but do not
overtighten.
ASSEMBLING SANDING BANDS
1. Slacken the screw on the end of
the mandrel and slide the
appropriate abrasive band fully
onto the rubber former.
2. Tighten the screw to secure the
band to the former.
FITTING THE COLLET
WARNING: MAKE SURE THAT THE TOOL HAS BEEN DISCONNECTED FROM
THE POWER SUPPLY BEFORE REMOVING OR FITTING A COLLET OR
ACCESSORY
The rotary tool is supplied with 2 interchangeable collets; 2.3mm and 3.2mm
(one supplied already fitted to the rotary tool).
Select the collet to be fitted according to the shaft size of the mandrel or other
accessory to be used.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8