Clarke 6462000 운영 및 유지보수 지침 매뉴얼 - 페이지 8

{카테고리_이름} Clarke 6462000에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6462000 17 페이지. Rotary tool set

FITTING DISCS & GRINDING STONES TO THE MANDREL

1. Mount the selected disc on to the

mandrel as shown, ensuring the

two washers are in place.

• DO NOT overtighten the screw.

FITTING CLOTH POLISHING WHEELS

1. Screw the cloth wheel onto the

mandrel firmly but do not

overtighten.

ASSEMBLING SANDING BANDS

1. Slacken the screw on the end of

the mandrel and slide the

appropriate abrasive band fully

onto the rubber former.

2. Tighten the screw to secure the

band to the former.

FITTING THE COLLET

WARNING: MAKE SURE THAT THE TOOL HAS BEEN DISCONNECTED FROM

THE POWER SUPPLY BEFORE REMOVING OR FITTING A COLLET OR

ACCESSORY

The rotary tool is supplied with 2 interchangeable collets; 2.3mm and 3.2mm

(one supplied already fitted to the rotary tool).

Select the collet to be fitted according to the shaft size of the mandrel or other

accessory to be used.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]