Clarke 6462000 운영 및 유지보수 지침 매뉴얼 - 페이지 10

{카테고리_이름} Clarke 6462000에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6462000 17 페이지. Rotary tool set

5. Insert the accessory into the collet

as far as it will go.

6. Press and hold down the spindle

lock and tighten the chuck sleeve

using the spanner supplied.

REMOVING THE ACCESSORY FROM THE COLLET

1. Press and hold down the spindle lock.

2. Using the spanner supplied, rotate the chuck sleeve in an anti-clockwise

direction.

3. When the accessory is released, remove it.

ATTACHING THE FLEXIBLE DRIVE ASSEMBLY

1. Unscrew and remove the securing

ring and store safely.

2. Slacken the chuck using the

spanner provided while pressing

and holding the locking button.

3. Slide the flexible drive through the

chuck and fully into the collet.

4. Press and hold the locking button

and screw the flexible drive

assembly onto the end of the tool

to secure it, taking GREAT CARE to not to cross-thread it.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]