Clarke CPSB100B Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Alat Listrik Clarke CPSB100B. Clarke CPSB100B 17 halaman.

MAINTENANCE

WARNING: DISCONNECT THE SANDBLASTER FROM THE AIR SUPPLY

BEFORE CHANGING ACCESSORIES, ATTEMPTING TO MOVE THE

SANDBLASTER OR PERFORMING ANY MAINTENANCE.

1. Keep your sandblaster clean and protect it from damage.

2. When initially pressurising, check for leaks at the top of the tank and at all

hoses and fittings.

3. Leaking joints maybe repaired by replacing worn or damaged parts or

using teflon tape.

4. Check for worn abrasive hose and fittings.

5. Watch for leaks, blistering, bulging or thinning of the hose.

6. Replace any parts which appear worn.

AIR FILTER

DRAINING

Condensation will collect in the air filter which must be drained manually.

1. Drain the air filter by pulling down

on the drain plug until all the water

comes out, see Fig 18.

CLEANING/REPLACING

1. Press the release catch and

unscrew the condensation

chamber, see Fig 19.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Fig 18

Fig 19