ALE Coral 144 Panduan Operator - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Operator untuk Printer ALE Coral 144. ALE Coral 144 18 halaman.

ALE

Check that all dots are operating : prepare a sheet of paper. Then in the Purge Menu,

●

press

"blackpad"

head. This function prints a solid rectangle of either heads 1 to 4 or 5 to 8 , with no

white lines across. Otherwise prime again using the "Normal Prime" option and a

bucket (Fig. 13) and check again if all dots are operating.

When the printing is correct on all print-heads, the collecting bucket can be removed

●

(Fig. 13).

carefully clean the print-head (Fig. 19).

●

Exit the Purge menu of the controller (

●

Set the system for printing back on your production line.

●

To make a test print :

Hold a piece of paper in front of the print-head. Briefly press "Test Print"

simultaneously pass the piece of paper across right to left. The result should be similar to

Fig. 20.

Coral144 Operator Manual

Design • Print • Trace

Fig. 19: !! Carefully and gently !! wipe the excess ink

whilst moving the sheet of paper in front of the print-

Fig. 20: Test message

)

03/12/2010

and