ページを印刷する
ALE
Check that all dots are operating : prepare a sheet of paper. Then in the Purge Menu,
●
press
"blackpad"
head. This function prints a solid rectangle of either heads 1 to 4 or 5 to 8 , with no
white lines across. Otherwise prime again using the "Normal Prime" option and a
bucket (Fig. 13) and check again if all dots are operating.
When the printing is correct on all print-heads, the collecting bucket can be removed
●
(Fig. 13).
carefully clean the print-head (Fig. 19).
●
Exit the Purge menu of the controller (
●
Set the system for printing back on your production line.
●
To make a test print :
Hold a piece of paper in front of the print-head. Briefly press "Test Print"
simultaneously pass the piece of paper across right to left. The result should be similar to
Fig. 20.
Coral144 Operator Manual
Design • Print • Trace
Fig. 19: !! Carefully and gently !! wipe the excess ink
whilst moving the sheet of paper in front of the print-
Fig. 20: Test message
)
03/12/2010
and
11