ページを印刷する
ALE
2.3
Print-heads alignment
Once the printer is inked, it is important to adjust the print engines with respect to each
other, to get a perfect print. The x parameter is horizontal. Its value can be changed freely.
the y is vertical. For physical reason it can be adjusted between -1 and +1.
The Setup Wizard contains 2 screens to do all the alignments:
Inter-Head Align (Fig. 21): a screen to adjust between colours. It allows to adjust
–
between blue and red for example.
Print-engine Align (Fig. 22) : a screen to make adjustments between 2 print-engines
–
of the same colour. For example if a white line appears in the middle of the print
height for the magenta colour, then the y value for Print Engine Align (Head 2)
should be decreased (F6)
Coral144 Operator Manual
Design • Print • Trace
Fig. 21: Setup Wizard Inter-head
Align screen for head 1 (Cyan)
Fig. 22: Setup Wizard print-
engine Align screen fro head 1
(Cyan)
03/12/2010
12