ALE Coral 144 Gebruikershandleiding - Pagina 16

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ALE Coral 144. ALE Coral 144 18 pagina's.

ALE

2.3

Print-heads alignment

Once the printer is inked, it is important to adjust the print engines with respect to each

other, to get a perfect print. The x parameter is horizontal. Its value can be changed freely.

the y is vertical. For physical reason it can be adjusted between -1 and +1.

The Setup Wizard contains 2 screens to do all the alignments:

Inter-Head Align (Fig. 21): a screen to adjust between colours. It allows to adjust

–

between blue and red for example.

Print-engine Align (Fig. 22) : a screen to make adjustments between 2 print-engines

–

of the same colour. For example if a white line appears in the middle of the print

height for the magenta colour, then the y value for Print Engine Align (Head 2)

should be decreased (F6)

Coral144 Operator Manual

Design • Print • Trace

Fig. 21: Setup Wizard Inter-head

Align screen for head 1 (Cyan)

Fig. 22: Setup Wizard print-

engine Align screen fro head 1

(Cyan)

03/12/2010