Zanussi ZRD 18 JB Buku Instruksi - Halaman 10

Jelajahi secara online atau unduh pdf Buku Instruksi untuk Kulkas Zanussi ZRD 18 JB. Zanussi ZRD 18 JB 18 halaman. Refrigerator- freezer combination

Halaman Cetak
GB

Technical data

Model
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption (kWh/24h)
(kWh/year)
Energy class, according to EU standards
Freezing capacity (kg/24h)
Rising time (h)
Rated power (W)
Weight (kg)
Number of compressors

Installing the appliance

Transportation, unpacking

It is recommended to deliver the appliance in orig-
inal packaging, in vertical position considering the
protective warning on packaging.
After each transportation the appliance must not be
switched on for approx. 2 hours.
Unpack the appliance and check if there are damages on
it. Report possible damages immediately to the place you
bought it. In that case retain packaging.

Cleaning

Remove every adhesive tape and everything else, which
ensure the accessories not to move in the applince.
Wash the inside of the applince using lukewarm water
and mild detergent. Use soft cloth.
After cleaning wipe out the inside of the applince.

Placement

The ambient temperature has an effect on the energy
consumption and proper operation of the appliance.
When placing, take into consideration that it is practi- cal
to operate the appliance between ambient tem- perature
limits according to the climate class that is given in the
chart below and can be found in the data label.
Class of climate
SN
N
ST
52

Instructions for the Installer

Ambient temperature
+10 ... +32 °C
+16 ... +32 °C
+18 ... + 38 °C
ZRD 18 JB
Freezer:
42
Refrigerator: 138
Freezer:
42
Refrigerator: 136
496
1209
600
0,72
263
A
3
17
75
39
1
If the ambient temperature goes below the lower data the
temperature of the cooling compartment can go beyond
the prescribed temperature.
If the ambient temperature goes beyond the upper data
this means longer operating time of the compressor,
breakdown in the automatic defrosting increasing temper-
ature in the cooling compartment or increasing energy
consumption.
When placing the appliance ensure that it stands level.
This can be achieved by two adjustable feet (1) at the bot-
tom in front.