Zanussi ZRD 18 JB Buku Instruksi - Halaman 12

Jelajahi secara online atau unduh pdf Buku Instruksi untuk Kulkas Zanussi ZRD 18 JB. Zanussi ZRD 18 JB 18 halaman. Refrigerator- freezer combination

Fix the double door holder onto the left side using the

screws (2 pieces). Be careful that the door edge of

the freezer is parallel with the edge of the mantle.

Fit the door of the refrigerator to the double door

holding pin.

Fix the bottom door holder onto the left side using the

screws (2 pieces) and the adjustable foot as well as

screw the 2 pieces screws on the opposite side into

the vacant holes. Be careful that the door edge of the

refrigerator is parallel with the edge of the mantle.

Put over the handle on the opposite side and cover up

the vacant holes with the plastic nails from the bag of

instruction book.

After released the screws the adaptation of the doors

can be adjusted with the horizontal control of central

door holder.

Put the appliance to its place, set it level and connect

to the electricity supply.

In case you do not want to perform the procedures above,

call the nearest brand-mark service. Technicians will

accomplish the refitting expertly for charge.

Electrical connection

This refrigerator is designed to operate on a

230 V AC ( ~ ) 50 Hz supply.

The plug must be put into a socket with protective

contact. If there is no such, it is recommended to get

an electrician to fit an earthed socket in compliance

with standards near the refrigerator.

This appliance complies with the following

E.E.C. Directives:

73/23 EEC of 19.02.73 (Low Voltage Directive) and

subsequent modifications,

89/336 EEC

Compatibility Directive) and subsequent modifica-

tions.

03.05.89

(Electromagnetic