Zanussi ZRT18100WA Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Zanussi ZRT18100WA. Zanussi ZRT18100WA 12 halaman.
Halaman Cetak
1. Deactivate the appliance.
2. Remove all the food from the freezer. Wrap
the food in newspaper and keep it at a cold
temperature.
3. Keep the appliance door open until defrost-
ing is completed.
4. Clean and fully dry the freezer.
5. Connect the mains plug to the mains sock-
et.
6. Activate the appliance.
7. Set the temperature knob at the highest po-
sition and let the appliance operate for 2 or
3 hours with this setting.
8. Put back the food in the freezer.
When the appliance is not used for long
periods
1. Deactivate the appliance and disconnect
the mains plug from the mains socket.
2. Remove all the food.
3. Defrost the appliance.
4. Fully clean and dry the appliance and all the
accessories.
5. Keep the doors open to prevent unpleasant
smells.
Replacing the lamp
1
Troubleshooting
Warning! Disconnect the mains plug from
the mains socket before you do the check.
Problem
The appliance makes noise during
operation.
The appliance does not operate.
www.zanussi.com
2
Some sounds are normal when the appliance is operating. Refer to
the leaflet supplied with the appliance.
Make sure that the appliance is activated.
1. Disconnect the appliance.
2. Push the movable part to unhook the lamp
cover (1).
3. Remove the lamp cover (2).
4. Replace the old lamp with a new one. Use
only lamps for household appliances.
5. Install the lamp cover.
6. Connect the mains plug to the main sock-
et.
7. Open the door. Make sure that the lamp
comes on.
The type of light bulb or halogen lamp
used for this appliance, is only for house-
hold appliances. Do not use it for house light-
ning.
For problems that are not in the table, contact
the Service.
Possible solution
7