Zanussi ZRT18100WA Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Zanussi ZRT18100WA. Zanussi ZRT18100WA 12 halaman.

Halaman Cetak

Problem

The lamp does not come on.

The compressor operates continu-

ously.

Water collects on the rear plate of

the fridge.

Water collects in the fridge.

There is water on the floor.

The temperature in the appliance is

too cold

The temperature in the appliance is

not sufficiently cold.

The temperature in the fridge is not

sufficiently cold.

There is too much frost.

Technical information

Positioning

This appliance can be installed in a dry, well

ventilated indoor (garage or cellar) also, but for

optimum performance install this appliance at a

location where the ambient temperature corre-

Make sure that the mains plug is connected to the mains socket.

Do a check and see if there is voltage. Connect a different appliance

to the same mains socket. To repair a mains socket, contact a quali-

fied electrician.

Close and open the door to make sure that the lamp is not in standby.

The lamp is defective. Replace the lamp.

Set the temperature knob at a lower position.

Make sure that the appliance door is closed.

Make sure not to open and close the appliance door too frequently.

Make sure not to put hot food in the appliance. Wait until it becomes

cool.

Make sure that the room temperature is not too warm.

It is normal that this occurs when the automatic defrosting operates.

Make sure that the drain hole is not clogged.

Make sure that food or packaging do not prevent the water to collect

in the water container.

The melting water outlet does not flow in the evaporative tray above

the compressor.

Attach the melting water outlet to the evaporative tray.

Set the temperature knob to a lower position.

Set the temperature knob to a higher position.

Make sure that the appliance door is closed.

Make sure not to put hot food in the appliance. Wait for the food to

become cool.

Make sure that the appliance is not too full.

Make sure that there is cold air circulation.

Make sure that the food is closed in special containers or packaging.

Make sure that the appliance door is closed.

Set the temperature knob to a lower position.

sponds to the climate class indicated on the

rating plate of the appliance:

Possible solution