Zanussi ZRX51100WA Panduan Pengguna - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Zanussi ZRX51100WA. Zanussi ZRX51100WA 44 halaman.
Juga untuk Zanussi ZRX51100WA: Panduan Pengguna (42 halaman)

Halaman Cetak

Problem

Closing the door

1. Clean the door gaskets

2. If necessary, adjust the door Refer to

"Installation"

Installation

WARNING!

Refer to Safety chapters

Positioning

This appliance should be installed in a dry, well

ventilated indoor climate where the ambient

temperature corresponds to the climate class

indicated on the rating plate of the appliance:

Climate

class

Some functional problems might occur

for some types of models when operating

outside of that range The correct

operation can only be guaranteed within

the specified temperaturerange. If you

have any doubts regarding where to

install the appliance, please turn to the

vendor, to our customer service or to the

nearest Service Centre

www.zanussi.com

Possible cause

The thickness of the frost is

greater than 4-5 mm

The door has been opened

often

There is no cold air circula-

tion in the appliance

Ambient temperature

+10ºC to +32ºC

+16ºC to +32ºC

+16ºC to +38ºC

+16ºC to +43ºC

Solution

Defrost the appliance

Open the door only if necessary

Make sure that there is cold

air circulation in the appliance

3. If necessary, replace the defectivedoor gas-

kets Contact the ServiceCenter

Location

WARNING!

It must be possible to disconnect the

appliance from the mains power

supply; the plug must therefore be

easily accessible after installation

The appliance should be installed well

away from sources of heat such as radiators,

boilers, direct sunlight etc Ensure that air can

circulate freely around the back of the cabinet

To ensure best performance, if the appliance is

positioned below an overhanging wall unit, the

minimum distance between the top of the

cabinet and the wall unit must be at least 100