- ページ 19
冷蔵庫 Zanussi ZRX51100WAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZRX51100WA 44 ページ。
Zanussi ZRX51100WA にも： ユーザーマニュアル (42 ページ)
ページを印刷する
Problem
Closing the door
1. Clean the door gaskets
2. If necessary, adjust the door Refer to
"Installation"
Installation
WARNING!
Refer to Safety chapters
Positioning
This appliance should be installed in a dry, well
ventilated indoor climate where the ambient
temperature corresponds to the climate class
indicated on the rating plate of the appliance:
Climate
class
SN
N
ST
T
Some functional problems might occur
for some types of models when operating
outside of that range The correct
operation can only be guaranteed within
the specified temperaturerange. If you
have any doubts regarding where to
install the appliance, please turn to the
vendor, to our customer service or to the
nearest Service Centre
www.zanussi.com
Possible cause
The thickness of the frost is
greater than 4-5 mm
The door has been opened
often
There is no cold air circula-
tion in the appliance
Ambient temperature
+10ºC to +32ºC
+16ºC to +32ºC
+16ºC to +38ºC
+16ºC to +43ºC
Solution
Defrost the appliance
Open the door only if necessary
Make sure that there is cold
air circulation in the appliance
3. If necessary, replace the defectivedoor gas-
kets Contact the ServiceCenter
Location
WARNING!
It must be possible to disconnect the
appliance from the mains power
supply; the plug must therefore be
easily accessible after installation
The appliance should be installed well
away from sources of heat such as radiators,
boilers, direct sunlight etc Ensure that air can
circulate freely around the back of the cabinet
To ensure best performance, if the appliance is
positioned below an overhanging wall unit, the
minimum distance between the top of the
cabinet and the wall unit must be at least 100
mm
19