Zanussi ZU 9155 Buklet Instruksi - Halaman 15

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Kulkas Zanussi ZU 9155. Zanussi ZU 9155 16 halaman. Zanussi instruction refrigerator zu 9155
Juga untuk Zanussi ZU 9155: Buklet Instruksi (19 halaman)

Halaman Cetak

1. Technical Specifications

P R33/ 2

6. Fix cover (C) on guide (A) until it clips into place.

PR167

7. Open the appliance door and the furniture door at

90°. Insert the small square (B) into guide (A). Put

together the appliance door and the furniture door

and mark the holes as indicated in the figure.

Remove the squares and drill holes with Ø 2 mm

at 8 mm from the outer edge of the door. Place the

small square on the guide again and fix it with the

screws supplied.

PR168

8. Should the lining up of the furniture door be neces-

sary, use the clearance of slots.

At the end of operations, it is necessary to check if

the door of the furniture closes properly.

8mm

9. Fix cover (D) on guide (B) until it clips into place.

Fitting the plinth

Important

For the efficient operation of the appliance, it is

important that the original ventilation grid is

used.

For an opening height dimension A=820 mm and

a plinth height dimension a=100 mm, the plinth

may be fitted without adjustments. The same

applies to an opening height dimension B=870

mm and a plinth height dimension b=150 mm.

For plinth heights greater than a=100 mm, b=150

mm, a cut should be made in the plinth, 580 mm

wide, in the centre of the appliance position, leav-

ing a remaining height of a=100 mm, b=150 mm.

Attach plinth to the kitchen units.

Important

The plinth must be positioned at a minimun

distance of 25 mm from the door.

PR167/1

S.I.007

S.I.008