Clarke ZX-R Pro Series Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Alat Listrik Clarke ZX-R Pro Series. Clarke ZX-R Pro Series 17 halaman. 20v cordless multi function tool
Juga untuk Clarke ZX-R Pro Series: Panduan Pengoperasian, Pemeliharaan & Instruksi (8 halaman), Panduan Petunjuk Pengoperasian & Pemeliharaan (9 halaman), Panduan Petunjuk Pengoperasian & Pemeliharaan (17 halaman), Panduan Petunjuk Pengoperasian & Pemeliharaan (13 halaman), Panduan Petunjuk Pengoperasian & Pemeliharaan (17 halaman)

USING THE SANDER ATTACHMENT

WARNING: ALWAYS WEAR EYE PROTECTION AND A DUST MASK FOR

DUSTY APPLICATIONS AND WHEN SANDING OVERHEAD.

CHOOSING THE CORRECT SANDING SHEET

Ensure you have the correct sanding

paper for the application. Always

test on scrap material before using

on your final workpiece.

The sanding sheets are rated

according to the number marked

on the back of each sheet. The

lower the number, the coarser and

more abrasive the particles on the

sheet will be.

SANDING

1. Taking care that the sander is not

touching the work piece, switch

the tool on.

2. Place the tool on the workpiece,

ensuring the whole are of the

sanding base/pad is in contact

with the work surface.

3. Allow the tool to do the work and

do not apply heavy pressure.

Heavy pressure does not increase

the removal of material but may

wear out the sanding sheets

faster.

4. If sanding into corners, use the tip

or corner of the sanding pad.

NOTE: Take care not to apply

excessive pressure as this

can cause circular tooling marks on the work, especially if using

coarse sanding sheets.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

GRIT

USED FOR

Removing paint and

sanding down rough

surfaces

Sanding down plain timber.

120

Smooth finish to bare wood.

400

Fine sanding between

coats of paint