Clarke ZX-R Pro Series 운영 및 유지보수 지침 매뉴얼 - 페이지 10

{카테고리_이름} Clarke ZX-R Pro Series에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke ZX-R Pro Series 17 페이지. 20v cordless multi function tool
Clarke ZX-R Pro Series에 대해서도 마찬가지입니다: 작동, 유지보수 및 사용 설명서 (8 페이지), 운영 및 유지보수 지침 매뉴얼 (9 페이지), 운영 및 유지보수 지침 매뉴얼 (17 페이지), 운영 및 유지보수 지침 매뉴얼 (13 페이지), 운영 및 유지보수 지침 매뉴얼 (17 페이지)

USING THE SANDER ATTACHMENT

WARNING: ALWAYS WEAR EYE PROTECTION AND A DUST MASK FOR

DUSTY APPLICATIONS AND WHEN SANDING OVERHEAD.

CHOOSING THE CORRECT SANDING SHEET

Ensure you have the correct sanding

paper for the application. Always

test on scrap material before using

on your final workpiece.

The sanding sheets are rated

according to the number marked

on the back of each sheet. The

lower the number, the coarser and

more abrasive the particles on the

sheet will be.

SANDING

1. Taking care that the sander is not

touching the work piece, switch

the tool on.

2. Place the tool on the workpiece,

ensuring the whole are of the

sanding base/pad is in contact

with the work surface.

3. Allow the tool to do the work and

do not apply heavy pressure.

Heavy pressure does not increase

the removal of material but may

wear out the sanding sheets

faster.

4. If sanding into corners, use the tip

or corner of the sanding pad.

NOTE: Take care not to apply

excessive pressure as this

can cause circular tooling marks on the work, especially if using

coarse sanding sheets.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

GRIT

USED FOR

Removing paint and

sanding down rough

surfaces

Sanding down plain timber.

120

Smooth finish to bare wood.

400

Fine sanding between

coats of paint