Clarke ZX-R Pro Series 운영 및 유지보수 지침 매뉴얼 - 페이지 12

{카테고리_이름} Clarke ZX-R Pro Series에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke ZX-R Pro Series 17 페이지. 20v cordless multi function tool
Clarke ZX-R Pro Series에 대해서도 마찬가지입니다: 작동, 유지보수 및 사용 설명서 (8 페이지), 운영 및 유지보수 지침 매뉴얼 (9 페이지), 운영 및 유지보수 지침 매뉴얼 (17 페이지), 운영 및 유지보수 지침 매뉴얼 (13 페이지), 운영 및 유지보수 지침 매뉴얼 (17 페이지)

USING THE SAW ATTACHMENT

In sawing mode, the tool can be used to cut materials such as wood, plastics

and sheet metal such as aluminium, although the supplied blades are not

ideally suited to cutting steel or similar ferrous metals.

CAUTION: CLAMP YOUR WORKPIECE SECURELY IF POSSIBLE BEFORE

STARTING WORK.

NOTE: Ensure the blade is sharp and not damaged before starting work.

SAWING WITH THE STRAIGHT BLADE

1. Switch the tool on before it

touches the work piece.

2. If making a plunge cut use a slight

pendulum motion to allow chip/

debris removal.

NOTE: If using the saw attachments

for plunge cuts, only use the

saw on soft materials such as

softwood and plaster

boards. Always check that

there are no nails or screws in the workpiece before cutting.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]