Zanussi DE 6850 Buku Instruksi - Halaman 6

Jelajahi secara online atau unduh pdf Buku Instruksi untuk Mesin pencuci piring Zanussi DE 6850. Zanussi DE 6850 20 halaman. Dishwasher zanussi
Juga untuk Zanussi DE 6850: Buku Instruksi (21 halaman)

Halaman Cetak

Filling with salt

Only use salt specifically designed for use in

dishwashers.

All other types of salt not specifically designed for use in

a dishwasher, especially table salt, will damage the water

softener.

Only fill with salt just before starting one of the washing

programmes.

This will prevent any grains of salt or salty water, which

may have been spilled, remaining on the bottom of the

machine for any period of time, which may cause

corrosion.

To fill:

1. To fill with salt, unscrew

the cap of the salt

container.

2. Pour 1 litre of water inside

the container (this is

necessary only before

filling with salt for the first

time).

3. Using the funnel provided,

pour in the salt until the

container is full.

Do not worry if water over

flows from the unit when

filling with salt, this is quite normal.

4. Replace the cap making sure that there is no trace of salt

on the screw thread or on the gasket.

5. Screw on the cap tightly.

The salt container will require topping up periodically.

You are reminded of this by the salt indicator light on the

control panel which comes on when the salt has finished.

The salt indicator light on the control panel can remain

illuminated for 2-6 hours after the salt has been

replenished, assuming the dishwasher remains switched

on. If you are using salts that take longer to dissolve then

this can take longer. The function of the machine is not

affected.

SR06

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring

thorough rinsing, and spot and streak free drying. The

dispenser, which is positioned inside the door, holds about 110

ml of rinse aid, which is sufficient for 16 - 40 dishwashing

programmes, depending upon the dosage setting.

Filling with rinse aid

1. Open the container by turning the lid (A) anticlockwise.

2. Add the rinse aid until the container is completely full.

The indicator (B) will be completely dark.

3. Top up the rinse aid when the rinse aid indicator light on the

control panel illuminates.

BR01

If rinse aid refilling is necessary, the rinse aid indicator

light will illuminate only in setting mode and at the end of

the washing programme.

During the run of the programme it will remain off.

Ensure that the lid is closed after every refill.

Do not put liquid detergent in the rinse aid compartment. Clean

up any rinse aid spilt during filling with an absorbent cloth to

avoid excess foaming during the next wash.

It is possible to deactivate the rinse aid indicator light (see the

following instructions).

By default the rinse aid indicator light is active.

To deactivate the rinse aid indicator

light ensure that the dishwasher is off

and then proceed as follows:

1. Press INTENSIVE SID 80

buttons simultaneously.

2. While keeping the programme push buttons INTENSIVE

SID 80

and NORMAL pressed switch on the dishwasher by

pressing the ON-OFF push button.

The ON-OFF indicator light comes on.

At the same time, the indicator lights of the INTENSIVE SID

and NORMAL push buttons start flashing.

SO515

3. Press the NORMAL push button, the corresponding

indicator light keeps flashing while the indicator light of the

INTENSIVE SID 80

push button turns off. At the same time

the indicator light end of programme starts to flash.

BR03

and NORMAL programme push