Zanussi ZDV12004FA Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring Zanussi ZDV12004FA. Zanussi ZDV12004FA 21 halaman.

Programme

1) The pressure and the temperature of the water, the variations of the mains supply, the options and the

quantity of dishes can change the values.

2) With this programme you have the most efficient use of water and energy consumption for crockery and

cutlery with normal soil. (This is the standard programme for test institutes).

3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.

4) Use this programme to quickly rinse the dishes. this prevents the remaining food to bond on the dishes

and bad odours to come out from the appliance. Do not use detergent with this programme.

SETTINGS

PROGRAMME SELECTION MODE

The appliance is in programme selection mode when the programme indicator

After activation, the appliance is in programme selection mode by default . If not, set the programme

selection mode the following way:

1. Press and hold the programme button for 3 seconds.

Press the programme button until the appliance is in programme selection mode.

With this function you can cancel the running programme.

While the appliance is in programme selection mode:

1. Press and hold the programme button until the indicator

are on.

Settings available in the user mode:

•

The level of the water softener according to the water hardness.

•

The activation or the deactivation of the acoustic signal for the end of programme.

•

The activation or the deactivation of AirDry.

As the appliance stores the saved settings, there is no need to configure it before every cycle.

Degree of soil

Programme phases

Type of load

All

•

Duration

(min)

Prewash

flashes, and the indicators

Consumption values

Energy

(kWh)

0.1

flashes.

Water

(l)

and