Zanussi ZDV12004FA Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring Zanussi ZDV12004FA. Zanussi ZDV12004FA 21 halaman.
Halaman Cetak
ADJUSTING THE WATER SOFTENER
1. While the appliance is in user mode, wait until the indicators
•
The indicator
•
The current setting is indicated by the number of flashes of the indicator
pause + 5 flashes... = level 5).
2. Press the programme button to change the setting. Each pressing of the programme button increases
the level number. After reaching level 10, the count starts again from level 1.
3. Press the on/off button to confirm the setting.
THE WATER HARDNESS TABLE
German degrees
(°dH)
47 -50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting
2) Do not use salt at this level.
ACTIVATING THE ACOUSTIC SIGNAL FOR THE END OF PROGRAMME
By default, the acoustic signal is deactivated but it is possible to activate it.
While the appliance is in user mode, within about 5 seconds:
1. Press the programme button.
•
The indicators
•
The indicator
2. Wait until the indicators
•
The indicator
3. Press the programme button to change the setting.
•
The indicator
4. Press the on/off button to confirm the setting.
ACTIVATING AIRDRY
AirDry improves the drying results with less energy consumption.
By default, AirDry is activated with all programmes excluding
deactivate it.
still flashes.
French degrees
(°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
and
are on.
flashes.
and
are off.
is off = the acoustic signal is deactivated.
is on = the acoustic signal is activated.
mmol/l
Clarke degrees
8.4 - 9.0
7.6 - 8.3
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
(if applicable) but it is possible to
and
are off.
(e.g. 5 flashes +
Water softener
58 - 63
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
level
10
9
8
7
6
1)
5
4
3
2
2)
1
7