Zanussi ZBF22451SA Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembeku Zanussi ZBF22451SA. Zanussi ZBF22451SA 16 halaman.
Juga untuk Zanussi ZBF22451SA: Panduan Pengguna (16 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (45 halaman)
Halaman Cetak
2
1
9. Attach the appliance to the niche with 4
screws.
10. Remove the correct part from the hinge
cover (E). Make sure to remove the part DX,
in the case of right hinge, SX in opposite
case.
I
I
11. Attach the covers (C, D) to the lugs and the
hinge holes.
12. Install the vent grille (B), attach the hinge
covers (E) to the hinge.
13. Disconnect the parts (Ha), (Hb), (Hc) and
(Hd).
C
D
E
E
B
14. Install the part (Ha) on the inner side of the
kitchen furniture.
15. Push the part (Hc) on the part (Ha).
50 mm
90°
21 mm
21 mm
50 mm
www.zanussi.com
4mm
44mm
Ha
Hb
Hc
Hd
Ha
Hc
16. Open the appliance door and the kitchen
furniture door at an angle of 90°.
17. Insert the small square (Hb) into guide (Ha).
18. Put together the appliance door and the
furniture door and mark the holes.
19. Place the small square on the guide again
and fix it with the screws supplied.
20. Align the kitchen furniture door and the
appliance door by adjusting the part Hb.
8 mm
Hb
Ha
21. Press the part (Hd) on the part (Hb).
Hb
Hd
Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is attached tightly
to the cabinet.
If the ambient temperature is low (for
example, in the Winter), the size of
the gasket decreases. The size of
the gasket increases when the
ambient temperature increases.
Hb
13