Zanussi ZBF22451SA 사용자 설명서 - 페이지 13

{카테고리_이름} Zanussi ZBF22451SA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBF22451SA 16 페이지.
Zanussi ZBF22451SA에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (16 페이지), 사용자 설명서 (45 페이지)

페이지 인쇄

9. Attach the appliance to the niche with 4

screws.

10. Remove the correct part from the hinge

cover (E). Make sure to remove the part DX,

in the case of right hinge, SX in opposite

case.

11. Attach the covers (C, D) to the lugs and the

hinge holes.

12. Install the vent grille (B), attach the hinge

covers (E) to the hinge.

13. Disconnect the parts (Ha), (Hb), (Hc) and

(Hd).

14. Install the part (Ha) on the inner side of the

kitchen furniture.

15. Push the part (Hc) on the part (Ha).

50 mm

90°

21 mm

50 mm

www.zanussi.com

4mm

44mm

16. Open the appliance door and the kitchen

furniture door at an angle of 90°.

17. Insert the small square (Hb) into guide (Ha).

18. Put together the appliance door and the

furniture door and mark the holes.

19. Place the small square on the guide again

and fix it with the screws supplied.

20. Align the kitchen furniture door and the

appliance door by adjusting the part Hb.

8 mm

21. Press the part (Hd) on the part (Hb).

Do a final check to make sure that:

• All screws are tightened.

• The magnetic sealing strip is attached tightly

to the cabinet.

If the ambient temperature is low (for

example, in the Winter), the size of

the gasket decreases. The size of

the gasket increases when the

ambient temperature increases.