Zanussi ZFT11114WA Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembeku Zanussi ZFT11114WA. Zanussi ZFT11114WA 48 halaman.

Halaman Cetak
The equipment has to be cleaned regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral soap.
2. Regularly check the door seals and wipe
clean to ensure they are clean and free from
debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser and the
compressor at the back of the appliance
with a brush.
This operation will improve the performance
of the appliance and save electricity
consumption.
The lowest shelf, dividing the cooler
compartment from the compartment can be
removed only for cleaning. To remove pull out
the shelf straight.
To make sure fully functionality of the
compartment the lowest shelf and
cover plates must be put back in
their original position after cleaning.
The cover plates above the drawers in the
compartment can be taken out for cleaning.

Defrosting the freezer

A certain amount of frost will always form on the
freezer shelves and around the top
compartment. Defrost the freezer when the frost
layer reaches a thickness of about 3-5 mm.
Defrosting can be accelerated by placing bowls
with hot water (not boiling) inside the freezer.
CAUTION!
Never use sharp metal tools to
scrape off frost from the evaporator
as you could damage it. Do not use
a mechanical device or any artificial
means to speed up the thawing
process other than those
recommended by the manufacturer.
A temperature rise of the frozen food
packs, during defrosting, may
shorten their safe storage life.
About 12 hours prior to defrosting,
set the Temperature Regulator
toward higher settings , in order to
build up sufficient chill reserve for
the interruption in operation.
1. Switch off the appliance and disconnect the
mains plug from the mains socket.
18
2. Remove any stored food, wrap it in several
layers of newspaper and put it in a cool
place.
CAUTION!
Do not touch frozen goods with
wet hands. Hands can freeze to
the goods.
3. Leave the door open and insert the plastic
scraper in the appropriate seating at the
bottom centre, placing a basin underneath
to collect the defrost water.
In order to speed up the defrosting process,
place a pot of warm water in the freezer
compartment. In addition, remove pieces of
ice that break away before defrosting is
complete.
4. When defrosting is completed, dry the
interior thoroughly and keep the scraper for
future use.
5. Switch on the appliance.
6. Turn the Temperature Regulator to the Full
Loaded position and leave to run for at least
8 hours.
7. After the Red Indicator Light has gone out,
reload the previously removed food into the
compartments.
8. Adjust the Temperature Regulator
according to the quantity of the stored
foods.
Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
1. Disconnect the appliance from electricity
supply.
2. Remove all food.
3. Defrost (if necessary) and clean the
appliance and all accessories.
4. Leave the door/doors open to prevent
unpleasant smells.
www.zanussi.com