Zanussi ZV280R Buklet Instruksi - Halaman 4

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Pembeku Zanussi ZV280R. Zanussi ZV280R 12 halaman.
Juga untuk Zanussi ZV280R: Buklet Instruksi (12 halaman), Buklet Instruksi (13 halaman)

Halaman Cetak

Before use

Position and clean the cabinet as explained in the

section "Installation".

Before inserting the power plug into the

outlet and switching on the cabinet for

the first time, leave it standing upright

for about 30 minutes, or for 4 hours if it

was transported horizontally. Otherwise

the compressor may sustain damage.

This time will allow the oil sufficient

time to return to the compressor.

Using the freezer

To start the freezer and set the

correct temperature

Turn the thermostat control to the desired position.

1 :

The lowest position of the thermostat control results

in the highest temperature inside the cabinet.

6 :

The highest position of the thermostat control results

in the lowest temperature inside the cabinet.

0 :

Switched off.

Allow the cabinet to run for a period of 24 hours

whenever the temperature setting is changed. This

will allow the temperature to stabilise inside the

cabinet.

Switching off

Set the thermostat control to the "0" position.

Unplug the power supply plug from the wall socket

or, alternatively, remove the fuse.

Alarms and other features

Temperature alarm

A red warning lamp lights if it gets warmer than

-12°C. Find out what caused the alarm and correct

the situation. The lamp goes out when it becomes

colder than -13°C.

Temperature inside the freezer

To ensure that foodstuff will keep for a long time, be

sure that the temperature inside the freezer is -18°C

or below. Please note, however, that the energy

consumption increases as the temperature decreases.

Zanussi 8181497-01/0