Zanussi ZV280R 지침 책자 - 페이지 4

{카테고리_이름} Zanussi ZV280R에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZV280R 12 페이지.
Zanussi ZV280R에 대해서도 마찬가지입니다: 지침 책자 (12 페이지), 지침 책자 (13 페이지)

Before use

Position and clean the cabinet as explained in the

section "Installation".

Before inserting the power plug into the

outlet and switching on the cabinet for

the first time, leave it standing upright

for about 30 minutes, or for 4 hours if it

was transported horizontally. Otherwise

the compressor may sustain damage.

This time will allow the oil sufficient

time to return to the compressor.

To start the freezer and set the

correct temperature

Turn the thermostat control to the desired position.

1 :

The lowest position of the thermostat control results

in the highest temperature inside the cabinet.

6 :

The highest position of the thermostat control results

in the lowest temperature inside the cabinet.

0 :

Switched off.

Allow the cabinet to run for a period of 24 hours

whenever the temperature setting is changed. This

will allow the temperature to stabilise inside the

cabinet.

Set the thermostat control to the "0" position.

Unplug the power supply plug from the wall socket

or, alternatively, remove the fuse.

Temperature alarm

A red warning lamp lights if it gets warmer than

-12°C. Find out what caused the alarm and correct

the situation. The lamp goes out when it becomes

colder than -13°C.

To ensure that foodstuff will keep for a long time, be

sure that the temperature inside the freezer is -18°C

or below. Please note, however, that the energy

consumption increases as the temperature decreases.

Zanussi 8181497-01/0