Directed Directechs DB3 Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Elektronik Mobil Directed Directechs DB3. Directed Directechs DB3 18 halaman. Smart key for 2013 toyota highlander
Juga untuk Directed Directechs DB3: Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Manual (6 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (10 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman), Panduan Instalasi (19 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (17 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (18 halaman)

Halaman Cetak
Directed Directechs DB3 Panduan Instalasi

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.
IMPORTANT!
Before programming your module, you must first check if your vehicle is equipped with an OEM
remote starter and disable it. If the vehicle is equipped with an OEM remote starter, whether Active or Inactive,
it
MUST
be temporarily disabled or permanently disconnected depending on the vehicle Please refer to the
"OEM remote starter information" section of the guide for additional details.
Note:
In some cases, the module will program to the vehicle even if equipped with an OEM starter, but will
prevent the aftermarket remote start from functioning properly.
1
Wait until the LED turns ON solid red.
Wait 4 seconds before turning the ignition ON.
2
The LED flashes orange if an OEM remote starter is detected. Refer to "OEM remote starter
detection" for more information.
Press the Push-to-Start (PTS) button twice to turn the ignition ON. The LED turns ON solid
3
green for 3 seconds, then shuts OFF.
If the LED flashes orange, press the programming button 5 times. The LED turns ON solid
4
orange for 3 seconds to indicate the programming is completed. Otherwise, proceed to the
next step.
5
Press the PTS button once more to turn the ignition OFF.
You have successfully completed the module programming sequence.
10
403.TL6 2.26 2018 Toyota RAV4 Hybrid (Smart Key)
©2023 Directed. All rights reserved.