Zanussi ZHC 95 ALU Buklet Instruksi - Halaman 17

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Kap Ventilasi Zanussi ZHC 95 ALU. Zanussi ZHC 95 ALU 20 halaman. Cooker hood
Juga untuk Zanussi ZHC 95 ALU: Buklet Instruksi (20 halaman), Buklet Instruksi (18 halaman)

Halaman Cetak
Zanussi ZHC 95 ALU Buklet Instruksi
- Remove the plug from the upper part of the ducting fan unit, as it is not
possible to insert the flange F with the plug in place.
- Fit the flange F Ø120 or 150 mm,replace the plug.
· Air outlet directed to the right or left hand side.
- Remove the four screws fastening the plastic frame, as shown in figure .
- Fit the ducting spigot R and replace the four screws removed as above.
Fixing the chimney
a) Loosen the screws M fixing the two parts of the chimney and pull the
inner section I almost all the way out. Remove the protective film P .
b) Rest the lower section of the chimney in its housing on the top of the hood
canopy. Lower the ducting fan unit until it reaches the wall bracket S and
fix it using the screw H provided.Fit the cover D
(provided) on the wall bracket S.
c) Fix the chimney to the hood canopy C using the
four screws provided.
d) Insert the transparent seal Q (provided),so as to
eliminate any play between the two parts of the
chimney . Lock the screws M.
e) Remove the support rod B .
S
A08_21
D
E
E
A08_23
INSTALLATION INSTRUCTIONS
S
A08_22
E
E
H
Q
17
R
I
P
M
A08_20
Q
A08_24