Zanussi ZHC945 Buklet Instruksi - Halaman 12
Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Kap Ventilasi Zanussi ZHC945. Zanussi ZHC945 21 halaman.
It is dangerous to alter the specifi cations or attempt to modify this product in any way.
Technical Information
DIMENSIONS
ELECTRICAL SUPPLY:
The symbol
on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city offi ce,
your household waste disposal service or the shop where you purchased the product.
DOUBLE INSULATED DO NOT EARTH
Electrical Requirements
Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualifi ed
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
Before connecting to the mains supply ensure
that the mains voltage corresponds to the
voltage on the rating plate inside the cooker
hood.
INSTALLATION INSTRUCTIONS
HEIGHT OF CANOPY:
HEIGHT OF CHIMNEY:
WIDTH OF CANOPY :
DEPTH OF CANOPY:
VOLTAGE:
POWER CONSUMPTION:
FAN MOTOR:
HALOGEN LIGHT :
Note: CE Marking certifi es that this appliance complies with the requirements
laid down in EEC directive 89:336. (Electromagnetic compatibility) and
subsequent modifi cations and Low Voltage directive 72/23/E.
ELECTRICAL CONNECTIONS
(UPPER SECTION) 470 mm
(LOWER SECTION) 745 mm
(2 x 20 W)
This appliance is fi tted with a 3 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS1363 Part 4, fi tted with a 3 Amp fuse, is a
recommended mains supply connection
accessory to ensure compliance with the Safety
Requirements applicable to fi xed wiring
instructions.
This appliance conforms to BS 800: 1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.
12
64 mm
898 mm
520 mm
220-240 V 50Hz
245W
205W
40W