Zanussi ZHC945 Folheto de instruções - Página 12

Procurar online ou descarregar pdf Folheto de instruções para Campânula de ventilação Zanussi ZHC945. Zanussi ZHC945 21 páginas.

Imprimir página

It is dangerous to alter the speciﬁ cations or attempt to modify this product in any way.

Technical Information

DIMENSIONS

ELECTRICAL SUPPLY:

The symbol

on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be

handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of

correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city ofﬁ ce,

your household waste disposal service or the shop where you purchased the product.

DOUBLE INSULATED DO NOT EARTH

Electrical Requirements

Any permanent electrical installation must

comply with the latest I.E.E. Regulations and

local Electricity Board regulations. For your own

safety this should be undertaken by a qualiﬁ ed

electrician e.g. your local Electricity Board, or a

contractor who is on the roll of the National

Inspection Council for Electrical Installation

Contracting (NICEIC).

Electrical Connection

Before connecting to the mains supply ensure

that the mains voltage corresponds to the

voltage on the rating plate inside the cooker

hood.

INSTALLATION INSTRUCTIONS

HEIGHT OF CANOPY:

HEIGHT OF CHIMNEY:

WIDTH OF CANOPY :

DEPTH OF CANOPY:

VOLTAGE:

POWER CONSUMPTION:

FAN MOTOR:

HALOGEN LIGHT :

Note: CE Marking certiﬁ es that this appliance complies with the requirements

laid down in EEC directive 89:336. (Electromagnetic compatibility) and

subsequent modiﬁ cations and Low Voltage directive 72/23/E.

ELECTRICAL CONNECTIONS

(UPPER SECTION) 470 mm

(LOWER SECTION) 745 mm

(2 x 20 W)

This appliance is ﬁ tted with a 3 core mains

cable and must be permanently connected to

the electricity supply via a double-pole switch

having 3mm minimum contact gap on each

pole. A Switched Fuse Connection Unit to

BS1363 Part 4, ﬁ tted with a 3 Amp fuse, is a

recommended mains supply connection

accessory to ensure compliance with the Safety

Requirements applicable to ﬁ xed wiring

instructions.

This appliance conforms to BS 800: 1988 and

EEC Directive No. 78 308 regarding

suppression of radio and television

interference.

64 mm

898 mm

520 mm

220-240 V 50Hz

245W

205W

40W