Zanussi ZCG551GNC Panduan Pengguna - Halaman 22
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Zanussi ZCG551GNC. Zanussi ZCG551GNC 28 halaman. Product manaul
Gas burners
BURNER
Auxiliary burner
Semi-rapid burner
Rapid burner
Grill
Top Oven
Main Oven
Gas Connection
Use a flexible pipe in compliance with the regu-
lation in force. Be careful they do not come in
touch with mobile parts or they are not
squeezed.
Warning! Only a qualified and competent
person must do the gas installation.
Warning! Before gas connection
disconnect the mains plug from the
mains socket or switch off the fuse in the
fuse box. Close the primary valve of the
gas supply.
Supply piping should not be less than
R3/8. Connection is made to the Rc ½
(1/2 " B.S.P.) female threaded. Entry pipe loca-
ted just below the hob level on the rear left
hand side of the appliance.
The gas supply ramp is on the rear side of the
appliance.
Warning! Only liquid sealants to be used
when inlet gas pipe is fitted i.e.: do not use
P.T.F.E. sealant tape.
When installation is complete. Carry out a gas
tightness test and make sure that the seal of
each pipe fitting is correct.
Important! Use flexible tubing, which comply
with BS.669 current edition.
22
NORMAL POWER
kW
1,0
2,0
2,9
2,7
1,9
1,9
Warning! The gas bayonet must be in
mark area.
Dimension
Pressure test
The Rapid injector is used as a pressure test
point.
1. Connect the pressure gauge to the Rapid
injector.
NATURAL GAS
inj. 100/mm
70
96
119
120
99
99
A
B
C
A
B
C
D
E
www.zanussi.com
Btu/h
3412
6483
10236
9212
6483
6483
E
D
C
mm
250
680
50
250
580