Clarke 3400404 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Sander Clarke 3400404. Clarke 3400404 18 halaman. 225mm long reach drywall sander (230v)

Halaman Cetak

• Allow to get up to speed before working gently across the

workpiece until smooth.

7. Release the trigger.

• Wait until the motor has stopped fully before putting the sander

down.

LOCK ON FEATURE

For continuous sanding:

1. Squeeze the trigger and then press the LOCK ON button.

• The sander will continue to run even if the trigger is released.

2. To release the lock on feature, squeeze the trigger again.

SPEED CONTROL

To control the speed settings, turn the

speed control wheel located on the

trigger handle to the required

position.

1 = 800 rpm

2 = 1000 rpm

3 = 1200 rpm

4 = 1400 rpm

5 = 1600 rpm

Max = 1750 rpm

EDGE/CORNER SANDING

If there is a need to sand edges or

corners of walls.

1. Press down on the release clip

2. Pull edge sanding cover away

from main sander body

This will give access to 1/4 of the

sanding disc edge for rounding

edges and corners.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]