Clarke 3400404 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Sander Clarke 3400404. Clarke 3400404 18 halaman. 225mm long reach drywall sander (230v)

Halaman Cetak

4. If replacement is necessary,

renew the brush and replace the

cap.

MAINTENANCE

• ALWAYS inspect the sander before use and ensure it is in working

condition.

• Ensure all air vents are clear. (Use vacuum cleaner to clean the

machine where possible).

• Check the power cable to ensure it is sound and free from cracks,

bare wires etc. Avoid using solvents when cleaning plastic parts,

(most plastics are susceptible to damage from the various types of

commercial solvents).

TROUBLESHOOTING

PROBLEM

Sander is

overheating.

Excessive

Sparking.

Sander does

not operate

when

switched on.

Dust is not

extracted.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

CAUSE

The machine is blocked

with dust.

Worn brushes.

Check to ensure the fuse

in the plug is sound.

The dust bag is full or the

dust extractor flue is

blocked.

REMEDY

Clean the ventilation holes.

Wipe the exterior with a dry cloth.

See page 12, replacing carbon

brushes.

If the fuse is sound or blows

repeatedly, consult your CLARKE

dealer.

Remove and empty the bag, also

clear any blockage.