Clarke 3400404 Руководство по эксплуатации и техническому обслуживанию - Страница 13
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Сандер Clarke 3400404. Clarke 3400404 18 страниц. 225mm long reach drywall sander (230v)
Печатать страницу4. If replacement is necessary,
renew the brush and replace the
cap.
MAINTENANCE
• ALWAYS inspect the sander before use and ensure it is in working
condition.
• Ensure all air vents are clear. (Use vacuum cleaner to clean the
machine where possible).
• Check the power cable to ensure it is sound and free from cracks,
bare wires etc. Avoid using solvents when cleaning plastic parts,
(most plastics are susceptible to damage from the various types of
commercial solvents).
TROUBLESHOOTING
PROBLEM
Sander is
overheating.
Excessive
Sparking.
Sander does
not operate
when
switched on.
Dust is not
extracted.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CAUSE
The machine is blocked
with dust.
Worn brushes.
Check to ensure the fuse
in the plug is sound.
The dust bag is full or the
dust extractor flue is
blocked.
REMEDY
Clean the ventilation holes.
Wipe the exterior with a dry cloth.
See page 12, replacing carbon
brushes.
If the fuse is sound or blows
repeatedly, consult your CLARKE
dealer.
Remove and empty the bag, also
clear any blockage.
13