Clarke 6500560 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Sander Clarke 6500560. Clarke 6500560 13 halaman. 550w buffer/polisher
Halaman Cetak
ASSEMBLY
MOUNTING THE MACHINE
1. Bolt the buffer/polisher to a
workbench using the securing holes
shown.
• Check that all assembly nuts
and bolts are secure before
turning the machine on.
FITTING BUFFING/POLISHING PADS
1. Place the spacer over the shaft.
2. Place the polishing mop between the washers and secure with the retaining
nut, hand tight.
• The shaft threaded ends are handed LH and RH.
3. Tighten the nuts enough to grip without crushing the buffing/polishing pad.
NOTE: Wheel rotation, in use, will tighten the retaining nut.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7